8PT C2S Large Format Posters
8PT C2S Large Format Posters
These posters are printed on a semi-gloss card stock material.
Paper Type: | 8pt C2S Stock |
Coating: | No Coating |
Color: | Full color CMYK: 1 sided (4/0) |
Quantities: | Ranges from 1 to 10 |
Sizes: | 12"x24" 12"x36" 12"x48" 12"x60" 16"x20" 20"x24" 22"x28" 24"x24" 24"x36" 24"x36" 24"x48" 36"x60" 48"x48" 48"x60" 60"x60" 72"x12" 72"x24" 72"x36" 72"x48" 72"x60" 84"x12" 84"x24" 84"x36" 84"x48" 84"x60" 96"x12" 96"x24" 96"x36" 96"x48" 96"x60" |
Finishing: | Cut to size. |
File Type: | Print Ready PDF file |
- Files must be submitted with proper orientation to ensure proper back up.
- It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
- Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
- All type must be outlined (not embedded).
- No linked images.
- If file contains a dieline, it must be a separate spot colour called Dieline and be on its own layer.
- The dieline shape must be a single path stroked.
- Please provide vector only artwork for type, logos, shapes and all other artwork. Only provide embedded raster artwork for actual 4/C images.
- Black type should have the following values: C0, M0, Y0, K100.
- The trim size of the Illustrator file must match the final trim size of the label. Use bleed settings in Illustrator of 0.0625 inches minimum each way.
- If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink. Do not supply separate files for CMYK and White Ink. If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this. You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.
- File should be CMYK only (no RGB) with a Dieline and/or White_Ink spot colour depending on your order specifications.
- If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline and/or White_Ink spot colours depending on your order specifications.